Method of Testing Air-to-Air Heat/Energy Exchangers
ASHRAE Standard Project Committee 84



Agenda

Tip: Upload Your Agenda documents to the /documents/agenda/ directory and it will show up here automatically.

SPC 84 2013R Agenda Revised 20170908

Upcoming PC Meetings

Tip: Copy and Paste Your Upcoming Meeting Information in this area.

  Chicago Winter Conference
 Tentative Date:  01/22/2018  4:15-6:30pm
 

 

 

 

 

Minutes

Project Committee meeting minutes are available to interested parties upon written request of the Manager of Standards. Attachments to minutes may or may not be included due to file size and/or because copyrighted intellectual property is included. Decisions to distribute attachments to the minutes will be made on a case by case basis and due to the size of the request may take longer to process.

Title, Purpose, and Scope

1. PURPOSE: The purpose of this standard is to:
(a) establish a uniform method of test for obtaining performance data for air-to-air heat/energy exchangers; ;
(b) specify the test conditions, data required, uncertainty analysis to be performed, calculations to be used, and reporting procedures for testing the performance of an air-to-air heat/energy exchanger; and
(c) specify the types of test equipment for performing such tests.

2. SCOPE: 2.1 This standard prescribes the methods for testing the performance of air-to-air heat/energy exchangers .

2.2 In this standard, an air-to-air heat/energy exchanger is a device to transfer heat and/or water vapor from one airstream to another. The types of air-to-air heat/energy exchangers covered by this standard are:
(a) regenerative energy exchangers (including heat wheels, or total energy wheels),
(b) heat pipe exchangers,
(c) thermosyphon exchanger,
(d) recovery loop exchangers (also called run-around exchangers), and
(e) fixed plate exchangers.

2.3 The scope of this standard also includes both laboratory and field tests, provided that appropriate levels of uncertainty can be achieved when testing .

2.4 A test is deemed to be within the scope of this standard if both a pre-test uncertainty analysis and a post-test uncertainty analysis yield satisfactory uncertainty limits.

 

Committee Chair

Tip: This section automatically generated from site Configuration file.

Matthew Friedlander

Webmaster

Tip: This section automatically generated from site Configuration file.

James Scudamore

icon

Upcoming Society Conferences

2017 Annual Conference
June 24 - 28, 2017
Long Beach, California

Tip: You can put any type of content in the following section.

News

No news at this time.